Nasiol PPFGuard Nano Ceramic Coating for Car Paint Protection Film(PPF) and PPF Protection-2 Year Durability-1.69FlOz (8680256691058)

PPFGUARD NEW FORMULA CAR PPF PROTECTION

50 mL / Durability: 2 Years

PPFGuard New Formula is the next-generation nano ceramic coating designed specifically for paint protection films. It enhances the film’s performance, keeping it clean, slick, and visually clear, while fully preserving its original properties such as self-healing and matte or satin finish. With powerful UV & chemical resistance, it helps prevent yellowing and color fading, ensuring the film looks newer for longer.

Thanks to its super-hydrophobic surface, dirt, contaminants, and water struggle to cling, making maintenance faster, easier, and more economical.

Why PPFGuard New Formula?

- Prolongs hydrophobic performance of PPFs.

- Does not interfere with self-healing properties.

- Helps reduce yellowing and aging effects.

- Even PPF loses hydrophobicity after ~6 months, PPFGuard restores and extends it up to 2 years.

- Specially developed for professional detailers.

APPLICATION SURFACES

Nasiol PPFGuard is applicable to paint protection films (PPF) including matt & transparent polyurethane (PU), high quality PVC films, vinyls. Do not apply product on finishes including low quality PPF, PPF w/ bubbles, absorbent surfaces, temporary road films, interior window tints, any film without resistance to solvents.

APPLICATION

For best results, ensure that the environment where the application will take place is as close as possible to the recommended levels of temperature and humidity (23°C and 50% relative humidity)

Apply in a shaded area

Only apply to surfaces that are not too cold or warm

Wash your vehicle thoroughly and gently. If necessary, should the PPF surface is suitable, polishing treatments can be applied using silicone-free products.

Dry the vehicle thoroughly to prevent water drops on the surface during application.

Eliminate any dust and dirt on the surface before application using Nasiol Clean. Ensure that the surface has thoroughly dried.

Partition the application area visually or with masking tape. Do not work on a partition larger than 1m² at a time.

Overlapping edges of partitions do not cause issues during application.

Shake the product gently before use. Carefully remove the cap. Place the small suede cloth on the block applicator, and apply the necessary amount of product (depending on the size of the application area) onto the cloth. Recap the bottle in order to prevent air contact. Using the suede cloth, spread the product throughout the surface in horizontal and vertical movements.

Using the enclosed microfiber cloth, carefully wipe any excess product off the surface within 30–45 seconds. Avoid causing swirls during this step. You can use a lighting system to ensure there is no product residue left on the surface. 

Throughout the curing time, keep the coated surface away from direct sunlight, excessive dust, water, and other contaminants. For the first 48 hours, do not wash the surface with shampoo or detergents. The vehicle can be taken outdoors 24 hours after the application.

NASIOL PPF GUARD SPECIFICATIONS

BOX CONTENT